timtechcorvairwiki:03_suspension:wheelcovers
Table of Contents
General
Hubcaps
- Standard for 500 models.
- 1960 and 1961 look similar but as you can see from the photos below are shaped very different.
- 1962 and 1963 are same hubcap.
- 1964 used a new hubcap design. (No photo as yet.)
Full Wheel Covers
- Standard for 700 and Monza's models.
- Optional for 500's as a factory or dealer options.
- 1962 used the same wheel cover with inserts.
- 500 & 700's used the triangle insert.
- Monza 900's used an insert with a Monza cross like the side emblem.
- 1963 used the same wheel cover with inserts.
- 500 & 700's used the triangle insert.
- Monza 900's used an insert with a Monza cross like the side emblem.
- 1964 used the same wheel cover with inserts.
- 500 & 700's used the triangle insert.
- Monza 900's used an insert with a Monza cross like the side emblem.
- Monza Spyder's used an insert with a Spyder.
Wire Wheel Covers
- Optional For all models as a factory or dealer options.
- 1962 and 1963 are very similar. The differences are:
- Outer ring shaped different (see picture).
- Pull ring to help remove cover added in 1963.
- 1964 was a completely new design. (No picture as yet)
By Years
1960
1961
1962
1963
1964
timtechcorvairwiki/03_suspension/wheelcovers.txt · Last modified: 2015/01/13 17:06 by 127.0.0.1